FolkPatch

English

简体中文

English

简体中文

Appearance

FolkTool Usage Guide

About 421 wordsAbout 1 min

2026-02-23

Recommended

FolkTool is an official one-click flashing tool for Windows, designed to simplify the installation process so that users without command-line experience can easily complete the flashing.

📥 Preparation

1. Download FolkTool

Please visit the GitHub Release page to download the latest version of the tool:

2. Prepare Boot Image

You need to prepare your device's boot.img file in advance. If you don't know how to get it, please refer to the instructions in Install / Use.

3. Enable USB Debugging

Ensure that "USB Debugging" in "Developer Options" is enabled on your phone and it is connected to the computer.

🚀 Flashing Steps

Step 1: Run the Tool

Double-click to run the downloaded FolkTool.exe. The tool interface is simple and intuitive, and will automatically detect the connection status.

Step 2: Select Image

Click the "Select File" button on the interface, browse and select the boot.img file you prepared.

Step 3: One-Click Flash

After confirming that the device is connected and the image selection is correct, click the "One-Click Flash" button.

  • The tool will automatically reboot your device to Fastboot mode.
  • Automatically perform patching and flashing operations.
  • Automatically reboot the device after completion.

No manual command input is required throughout the process, just wait for the progress bar to finish!

❓ FAQ & Troubleshooting

Device Not Connected / Not Recognized

In most cases, the drivers included with FolkTool are sufficient to recognize most devices on the market. If your device shows "Not Connected" or cannot be recognized in the tool, please try the following steps:

  1. Check Data Cable: Ensure you are using the original or a high-quality data cable, and connect to the rear USB port of the computer (for desktops).
  2. Manually Install Drivers: If the tool's built-in drivers cannot recognize the device, you may need to manually install generic ADB and Fastboot drivers.

Flashing Failed

  • Please ensure that the boot.img you selected matches the current system version (stock image).
  • Ensure that the Bootloader is unlocked.

Note

This tool currently only supports Windows operating system. Linux and macOS users please refer to Manual Patching method.

Copyright Ownership:FolkPatch Team

License under:Attribution 4.0 International (CC-BY-4.0)